Media Configuration for Applause Media System Omnia PCB
MDE-5369E FlexPay™ IV (with Omnia) Programming and Service Manual · April 2020 Page 5-27
Registering Omnia to Insite360 Cloud
To register Omnia to Insite360 Cloud, proceed as follows:
1 From the Insite360 Configuration page, click the Registration tab.
2 Enter a valid Tech ID number in the ASC ID field, and then click Register Omnia to SODA!
for registration.
Figure 5-40: Pre-registration to Gilbarco Cloud In Progress
Figure 5-41: Registration OK
A dialog box opens to indicate success or failure.
IMPORTANT INFORMATION
Do not reboot the Omnia for at least 2 minutes. The configuration is
synchronizing to the cloud during this time.
To Next Page
Loading...
Need help?
General
