GILBARCO VEEDER-ROOT FlexPay IV Insite360 Encore User Manual

Omnia PCB Omnia Tools
Page 5-46 MDE-5369E FlexPay™ IV (with Omnia) Programming and Service Manual · April 2020
Every test group can be executed simultaneously by selecting the check box and clicking the
corresponding Start button. While a test group (network or audio/video) is running, the
corresponding Start button indicates the state with the label “Running” and a spinning cog.
Figure 5-68: Network Test
The user cannot cancel or clear the selected tests while the corresponding test group is
running.
All test results are reported on lower panel in the page.
Figure 5-69: Results Screen

GILBARCO VEEDER-ROOT FlexPay IV Insite360 Encore Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	FlexPay IV Insite360 Encore
Category	Petrol Station Equipment
Language	English