GKB 4CH/8CH VFire Server
103
may click on Stop/Close button to stop the upgrade process.
Note : There must be at least one formatted HDD in the DVR/NVR for the remote
upgrade to succeed. After the software in the DVR/NVR is upgraded, the
DVR/NVR will restart immediately and the PC will be disconnected from the
DVR/NVR. Please do step 7 in Before Logging On, and then re-run the I.E. to
connect to the DVR/NVR again.
Click on this icon to call up GPS Configuration dialog. Please select the device.
Then select Display attributes and Output attributes for Live & Playback respectively.
If Data Exchange File is enabled, the corresponding GPS data will be output to the
file specified. Please note that Tag and Icon are to be used by GPS software such
as Google Earth for display purpose. If COM Port is enabled, the corresponding
GPS data will be output through the specified COM port of the PC. The output
data can be used as input by GPS application software such as Google Earth.
Click on this icon to call up POS Configuration dialog. Please select the device.
Then select Video Window or Pop-up Window to show the POS data. All the
other attributes are similar to those for the DVR/NVR.
To Next Page
Loading...