GKB 4CH/8CH VFire Server
122
Appendix G – VFire Server Operation
In Setup Menu display, press ▲▼◄► to change the highlighted option to
Pre-Camera, and then press ENTER (Mouse: Left click) to call up Pre-Camera Setup
display.
There are up to 8/4 IP CAM which can be connected to the system. The
Pre-Camera Setup allows the administrator to define some fundamental attributes
for the cameras.
The general operations are as below:
n ▲▼◄►
Press these buttons to select the items.
n Numeric
Press these buttons to select the camera.
n ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display.
If the contents have been modified, a Save dialog will be shown to ask the user
to save the changes, press ENTER to exit and save, ESC (Mouse: Right Click) to
exit without saving.
Following is a brief description for each item and its specific operations:
n Compression – Compression ratio of Normal or High. (Disable)
n Watermark – to record with digital watermark or not. If yes, all the recorded
images for all the cameras will have digital watermark embedded. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item. The default
setting is “ˇ” - checked.
To Next Page
Loading...