GKB 4CH - Software Upgrade (Administrator)

GKB 4CH/8CH VFire Server
32
5.6 Software Upgrade (Administrator)
In Menu display, press ▲▼◄► to change the highlighted option to Software
Upgrade, and then press ENTER to call up Software Upgrade display as shown.
The operations are as below:
n ▲▼◄► (Mouse: Left click)
Press these buttons to select the items.
n ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Menu display.
Following is a brief description for each item and its specific operations:
n Backup Device – press ENTER (Mouse: Left click) to call up Backup Device dialog
(if there’s no backup device connected).
n Disk Storage – to select the disk storage to upgrade. Press +/- buttons to
select the available storage.
n Upgrade File – press ENTER (Mouse: Left click) to start the upgrade process
when the highlighted file is a correct upgrade file. A confirmation dialog will
be shown on the screen, press ENTER to confirm to upgrade the system
software.
Note : After the software is upgraded, the system will restart immediately. The
split window display will be shown after restart, please wait a moment.