GKB 4CH/8CH VFire Server
49
6.4 Main/SEQ Display Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to
Main/SEQ Display, and then press ENTER to call up Main/SEQ Display Setup.
The Main/SEQ Display Setup allows the administrator to define the display pages
in SEQ Display for main monitor and call monitor. Please note that Call Monitor
supports 1/4 split window display.
The general operations are as below:
n ▲▼◄► (Mouse: Left click)
Press these buttons to select the items.
n ESC (Mouse: Right Click)
Press this button to escape from this screen. If the Save dialog is shown,
press ENTER to exit and save, ESC (Mouse: Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:
n Call Monitor 1/4W (disabled) – select split window of Call Monitor. Press +/-
buttons to select the desired value.
n Main Display Type – “Default” for default main display type and “SEQ” for main
display to use SEQ settings.
n CVBS (disabled) – CVBS out for “Main Monitor” or “Call Monitor”.
To Next Page
Loading...