GKB 4CH/8CH VFire Server
95
9. Remote Access
9.1 PC Remote Access
The network video/audio recorder can be accessed by using a web browser
installed on a PC if this unit is connected to a network, either internet or intranet.
Before Logging On
Before accessing this unit through web browser, please make sure the followings
(For most PCs, only step 4 & 7 is needed!):
1. This unit is connected to the network correctly, and the configurations are all
setup correctly. Please refer to Section 6.10 Network Setup for the detailed
configurations.
2. DirectX
®
End-User Runtime 9.0 or above has been installed in your PC
successfully. If not, please logon to http://www.microsoft.com to get the free
download of it.
3. Windows XP KB319740 Package has been installed in your PC successfully if the
PC is running Windows XP SP2. If not, please logon to
http://www.microsoft.com/downloads/details.aspx?FamilyId=9B5EDFC8-A4BB
-4080-9063-6518166E2DAB&displaylang=en to get the free
download of it, or install it from the corresponding directory in the CD. (This
package is a bug fix for Windows XP SP2.)
4. The domain name or IP address of the network video/audio recorder has been
set as trusted web site in your PC, and the (https:) server verification for trusted
web site is unchecked. If not, please go to Tools->Options->Security in your
I.E. to do the settings. For I.E. 7, please set the Security level for this zone to
Low.
5. The ActiveX control in your PC is not disabled. If you are not sure, please go to
Tools->Options->Security->Custom in your I.E. to enable ActiveX control.
6. Port 67 (control port) or port 68 (data port) is not blocked out by your router or
ISP (Internet Service Provider).
7. If the PC has used I.E. to access earlier software version of DVR/NVR, please go
to Tools->Options->General in your I.E. to delete “Temporary Internet files” and
all offline contents.
To Next Page
Loading...