GKB 4CH - 6.1 Pre-Camera Setup

GKB 4CH/8CH VFire Server
35
6.1 Pre-Camera Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to
Pre-Camera, and then press ENTER (Mouse: Left click) to call up Pre-Camera Setup
display.
There are up to 8/4 IP CAM which can be connected to the system. The
Pre-Camera Setup allows the administrator to define some fundamental attributes
for the cameras.
The general operations are as below:
n ▲▼◄►
Press these buttons to select the items.
n Numeric
Press these buttons to select the camera.
n ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display.
If the contents have been modified, a Save dialog will be shown to ask the user
to save the changes, press ENTER to exit and save, ESC (Mouse: Right Click) to
exit without saving.
Following is a brief description for each item and its specific operations:
n Compression – Compression ratio of Normal or High. High compression ratio
will result in smaller storage size, and hence longer recording time; but the
Normal Record IPS will always be the same as Event Record IPS in Camera
Setup, and Dual Streaming will always be used for network video. Press +/-