GKB 4CH/8CH VFire Server
74
6.10.2 FTP Setup
In Network Setup, press ENTER to call up FTP Setup as shown when the highlighted
option is FTP.
The FTP Setup allows
the administrator to
set FTP related
parameters. When
an event occurs and
FTP is enabled for the
action, the recorded
video/audio for that
event will be sent to the FTP server based on the parameters set here.
The general operations are as below:
n ▲▼ (Mouse: Left click)
Press these buttons to select the items.
n ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Network Setup
display. If the Save dialog is shown, press ENTER to exit and save, ESC
(Mouse: Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:
n FTP Server – FTP server web/IP address with or without directory path. Please
follow the Text Input method described in Section 4.1 to modify this item.
n FTP Port – the FTP port. The default value is 21. Please follow the Text Input
method described in Section 4.1 to modify this item.
n Username – username for this NVR unit in the FTP server. Please follow the
Text Input method described in Section 4.1 to modify this item.
n Password – password for this NVR unit in the FTP server. Please follow the
Text Input method described in Section 4.1 to modify this item.
n Prefix Of Filename – the prefix of the filenames for the files sent to the FTP
server. If it’s empty, the filenames will be “cam..”; if not, the filenames will be
“Prefix-cam..”. For example, if the prefix is “NVR01”, then the filenames will be
“NVR01-cam..”. Please follow the Text Input method described in Section 4.1
to modify this item.
To Next Page
Loading...