GKB 4CH/8CH VFire Server
45
Press this button to increase/decrease the “number of grids treated as
motion” for the motion detection of this camera.
n SEARCH (Mouse: )
Press this button to test the motion detection of this camera. The detected
motion will be shown on the screen. Press this button again to stop
testing.
n ESC (Mouse: or Right Click)
Press this button to escape from Motion Detection Setup, and return to
Motion Setup.
n Privacy Mask Settings.. – used to setup the privacy mask settings. Press
ENTER in Settings.. to call up Privacy Mask Setup for this camera. The Privacy
Mask Setup is similar to Motion Detection Setup, except that the grayed area of
the camera will be blacked out for live/recorded video.
To Next Page
Loading...