GKB 4CH/8CH VFire Server
66
n System Time –
n Synchronization – time synchronized with TSP Server or not. Press +/- to
change the value. The default setting is “–” - unchecked. Please note
that “Local Server” means this NVR is used as TSP server.
n TSP Server – TSP (Time Synchronization Protocol) server name if Time
Synchronization is set to “TSP Server”. The system will try to do time
synchronization with the specified TSP server at the system preset interval.
Please follow the Text Input method described in Section 4.1 to modify this
item.
n Date – system date. Press +/- buttons to modify each of these items.
n Time – system time. Press +/- buttons to modify each of these items.
n Display Format – format used for the system time displayed on the
lower-left corner of the main screen. Press +/- buttons to select the
desired format.
n Language – press +/- buttons to select the language for the system. The
languages supported include: English, Russian, Simplified Chinese, Spanish,
Traditional Chinese, Polish, Turkish, etc.
n Protection Key – the protection key for the remote access of the system.
Please follow the Text Input method described in Section 4.1 to modify these
items.
Note: This protection key will be used for authentication when any remote
station wants to connect with the system from Ethernet interface, either
LAN or internet. So, the same protection key must be entered to install
the remote software if it is to be used to access the system.
To Next Page
Loading...