GKB 4CH/8CH VFire Server
68
POS printer types supported include Epson General (EX. Epson-TM200,
Epson-TMU300, Epson-TMU675, Epson-TMT882, Epson-RPU420, and
Epson-MD332S) and Epson-TMU295. Press +/- buttons to change the
supported model (or protocol). Please note that if PTZ+Keyboard is selected
for Device Type, the Keyboard model is always Control Protocol, and the other
settings (Baud Rate, Data Bit, Stop Bit, and Parity) are the same as the PTZ
Model selected. Please also note that the installer must be sure that the
Keyboard Control Protocol and the PTZ Protocol won’t conflict with each other.
n Baud Rate – press +/- buttons to change the value.
n Data Bit – press +/- buttons to change the value.
n Stop Bit – press +/- buttons to change the value.
n Parity – (Odd, Even, or None). Press +/- buttons to change the value.
n DVR/NVR/Camera ID – for PTZ/Keyboard => the device ID for this network
video/audio recorder, and it must not conflict with the other devices connected
in the same control port.; for GPS/POS => the Camera ID to receive the
GPS/POS data. For IR => the DVR/NVR ID to receive the IR control signal, “-” to
receive any DVR/NVR ID signal. Press +/- buttons to change the ID.
Some GPS Devices Tested
HOLUX GR-213 G-Mouse GPS Receiver
Garmin GPS 18 OEM
GlobalSat BR-355 Cable GPS
To Next Page
Loading...