GKB 4CH - Page 70

GKB 4CH/8CH VFire Server
70
n IP Address – Ethernet IP address of the “Net Type” above for the system. To
get the static IP address, please contact your local ISP (Internet Service Provider).
Please follow the Text Input method described in Section 4.1 to modify these
items.
n Net Mask – Net Mask for the Ethernet IP address. Please follow the Text Input
method described in Section 4.1 to modify these items.
n Gateway – Ethernet Gateway IP address. Please note that the priority of
Gateway is (1) Ethernet Gateway and (2) 3G Gateway. Please follow the Text
Input method described in Section 4.1 to modify these items.
n DNS – DNS (Domain Name Server) IP address for Ethernet. Please follow the
Text Input method described in Section 4.1 to modify these items.
n PPPoE Username – PPPoE username for the system if PPPoE is used. Please
follow the Text Input method described in Section 4.1 to modify this item.
n PPPoE Password – PPPoE password for the system if PPPoE is used. Please
follow the Text Input method described in Section 4.1 to modify this item.
n P2P – if enabled, the QR code of the NVR will be shown on the upper right
corner, and users can scan it to access the NVR remotely through the QR code
in the future. Please make sure that TCP hole punching is possible for the NAT,
Full-cone or Address restricted cone, of the router connected to internet for the
NVR or remote software.
n DDNS Type – Dynamic, Static, Custom DDNS (Dynamic Domain Name Server)
type, etc. Please contact your local DDNS Service Provider to get the DDNS
URL, username, and password. Press +/- buttons to change this item. If
internet is accessible, the user can select “Fly2DNS” for free built-in DDNS server,
URL/DDNS Username/DDNS Password will be filled in automatically after the
user exits and saves the settings. The user can change the prefix of the URL
afterwards.
n URL – the URL (Uniform Resource Locators) for the system. Please follow the
Text Input method described in Section 4.1 to modify this item.
n DDNS Username – DDNS username for the NVR for Static IP, PPPoE, or DHCP.
Please follow the Text Input method described in Section 4.1 to modify this item.
n DDNS Password – DDNS password for the NVR for Static IP, PPPoE, or DHCP.
Please follow the Text Input method described in Section 4.1 to modify this item.
n Notification – press ENTER (Mouse: Left click) to call up Notification Setup.