GKB 4CH - Page 80

GKB 4CH/8CH VFire Server
80
miscellaneous function specific operations are described in the following table.
Miscellaneous function specific operations:
Active function
Operations
Descriptions
Focus
+/-
ENTER
focus far/near (Mouse: )
auto focus (Mouse: )
Iris
+/-
Iris increase/decrease (Mouse:
)
Auto Pan (3)
(Mouse: )
+/-
ENTER
*
#
Auto pan speed is shown in parenthesis
increase/decrease speed
start/stop Auto Pan
set start position
set end position
SEQ (5 sec.)
(Mouse: )
+/-, NUMBER
ENTER
SEQ dwell time is shown in parenthesis.
If SEQ mode is on, the camera will goto
preset position 0-9 (or 1-10)
sequentially.
change dwell time
start/stop SEQ mode, an asterisk (*) will
be shown if SEQ mode is on
Preset (1)
(Mouse:
, )
+/-, NUMBER
ENTER
#
Preset location is shown in parenthesis
change Preset location
set Preset location
clear Preset location
Pan Speed (3)
(Mouse: )
+/-
Manual pan speed is shown in
parenthesis
increase/decrease speed