Global 5120 - 2.2 Unpacking, Assembly and Mounting

GlobalPowerTechnologies  2-1
5120
2 Operation
2.1 Physical Description
5120 Dimension Chart
Length 757mm(29.8in.)
Width 370mm(14.6in.)
Height 987mm(38.9in.)
Weight 60kg(132lb)
ShippingWeight 79kg(175lb)
MountingHoles 267mmX457mm(10.50wideX18.00deep)
2.2 Unpacking, Assembly and Mounting
ToolsRequired:
• 1  DCVoltmeteraccurateto0.1V.
• 2  Smalladjustablewrenchesthatwillopento16mm(5/8inch).
• 1  Flatheadscrewdriver.
• 4  #1/4-20bolts&nutsformounting.
• 1  PhillipsScrewdriver.
Unpack the 5120 TEG from its shipping crate.  Keep the crate until the TEG is operational.
ChecktheTEGfordamagewhichmayhaveoccurredduringshipping.Anydamagemustbe
reportedassoonaspossible.Thedamagemaymakethegeneratorinoperabletherefore,
Check with Global Power Technologies (GPT) Customer Service before starting a dam-
aged TEG.
 Locateandidentifythefollowingitemsthatwereshippedwiththe5120TEG.
• 1  1FinDuct.
• 1  IntakeStackwithClamp.
• 1  ExhaustStackwithClamp.
• 1  ThreadSealingCompound.
• 7  #8-32x¼inchlongScrews(1spare).
• 7  #8Washers,externallock.
AssembletheTEGasfollows(seeFigure2):
1) Attachthenductusingthe#8screwsandwasherssupplied.
2) Inserttheintakeandexhauststacksintothetopofthecabinet.
3) Slidetheclampsoverthebottomsofeachstackandtightentheclampscrews.