Need help?Do you have a question about the GOM ARAMIS and is the answer not in the manual?
General| Brand | GOM |
|---|---|
| Model | ARAMIS |
| Category | Digital Camera |
| Language | English |
Defines standard signal words like DANGER, WARNING, CAUTION, NOTICE, INFO.
Details hazards like explosion, laser radiation, and falling over.
Lists examples of applications for the ARAMIS system.
Outlines the general steps for a typical measurement using the ARAMIS system.
Describes the main components and features of the ARAMIS Adjustable SRX system.
Provides a table summarizing the technical specifications of the ARAMIS Adjustable SRX system.
Explains key terms and components related to the 3D sensor unit and measuring volume.
Explains how sensor and lens configurations define the measuring volume.
Lists recommended sensor configurations and measuring volumes.
Provides examples of setting up different measuring volumes with camera lenses.
Describes the camera lenses, their markings, and handling.
Explains how to use the tommy screws for camera adjustment and fixture.
Details how to handle camera locking screws and their torque.
Guides on preparing the wireless remote control for use with the system.
Details the functions of each key on the wireless remote control.
Instructs on initiating the ARAMIS sensor setup within the GOM software.
Explains how to position the sensor and adjust the measuring distance to the object.
Describes how to adjust the distance between camera slide units for symmetrical positioning.
Details the procedure for fine-tuning the camera's tilt angle using adjustment screws.
Guides on adjusting the camera angle by aligning crosshairs with the projected laser point.
Explains how to secure the cameras in their adjusted positions using the large handles.
Guides on adjusting the camera lens focus and aperture for optimal image brightness.
Details how to adjust the camera aperture for optimal depth of field and image similarity.
Explains how to adjust polarizing filters on lights and cameras to avoid reflections.
Provides guidelines for safely handling sensitive calibration objects to ensure accuracy.
Outlines the conditions and prerequisites for performing sensor calibration correctly.
Describes the process of calibrating the sensor using the CP40 calibration panel.
Provides detailed instructions for handling the CP40 calibration panel.
Guides on importing calibration data for the CP40 panel into the software.
Outlines the steps for calibrating the sensor using the software interface.
Explains how to interpret the calibration result indicated by icons in the software.
Describes the process of calibrating the sensor using the CC20 calibration cross.
Details important handling instructions for the CC20 calibration cross.
Guides on importing calibration data for the CC20 cross into the software.
Outlines the requirements and preparation steps before starting the calibration.
Describes how to position the calibration cross relative to the sensor for calibration.
Details the step-by-step process for calibrating the sensor using the calibration cross.
Explains how to query and interpret the calibration result after the procedure.
Provides cabling instructions for the ARAMIS Adjustable SRX system.
Presents the full text of the EU Declaration of Conformity for the product.
To Next Page