GOM ARAMIS - Table of Contents

Table of Contents
Legal Notes.............................................. ......2
1 Important Notes...........................................5
1.1 Standard Signal Words......................... ......5
1.2 Safety and Health Hazard Notes..............5
2 Introduction...................................................7
2.1 Fields of Application....................................7
3 Brief Introduction to the ARAMIS
System.............................................................8
3.1 Typical Measuring Procedure....................9
4 System Overview.................................... ... 10
4.1 Important Features................................ ... 10
4.2 Technical Data............................................ 10
4.3 Definition of Terms................................ ... 12
4.4 Sensor Configurations.......................... ... 12
4.4.1 Defined Measuring Volumes.................. 13
4.4.2 Further Configuration Examples........ ... 14
5 Control Elements....................................... 16
5.1 Lenses........................................................... 16
5.2 Handling of Tommy Screws.................... 17
5.3 Handling of the Camera Locking
Screws....................................................... ...17
6 Wireless Remote Control..................... ... 19
6.1 Prepare the Remote Control............... ... 19
6.2 Explanation of the Function Keys...... ... 20
7 Set Up Sensor.......................................... ... 21
7.1 Set Up Sensor with Software.............. ... 21
7.2 Adjust Measuring Distance................. ... 22
7.3 Adjust Slider Distance........................... ... 22
7.4 Adjust the Camera Tilt Angle................. 25
7.5 Adjust the Camera Angle........................ 27
7.6 Lock Cameras.......................................... ... 28
7.7 Adjust the Focus..................................... ... 28
7.8 Adjust the Aperture.................................. 29
8 Specimen Lighting (Option)................... 31
8.1 Adjust the Polarizing Filters for the
Specimen Lighting................................. ... 31
9 Sensor Warm-Up.................................... ... 33
10 Calibrate the Sensor.............................. ... 34
10.1 How to Handle Calibration Objects.. ... 35
10.2 Calibration Conditions............................. 36
10.2.1 When is Calibration Necessary?......... ... 36
10.2.2 Prerequisites............................................ ...36
10.3 Calibrate Sensor with Calibration
Panel CP40............................................... ... 38
10.3.1 Handling Instructions for the Cali‐
bration Panel CP40................................ ...40
10.3.2 Load Calibration Data........................... ... 41
10.4 Calibration Procedure........................... ... 41
10.5 Calibration Result...................................... 43
10.6 Calibrating ARAMIS Sensor with
Calibration Cross CC20.............................43
10.6.1 Handling Instructions for Calibra‐
tion Cross CC20.......................................... 44
10.6.2 Load Calibration Data........................... ... 45
10.6.3 Prepare the Calibration............................ 46
10.6.4 Position Calibration Cross.................... ... 46
10.6.5 Calibration Procedure........................... ... 46
10.6.6 Calibration Result...................................... 50
11 Cabling......................................................... 52
11.1 Cabling of ARAMIS Adjustable.............. 52
11.1.1 Cabling of ARAMIS Adjustable SRX.. ...52
12 Declaration of Conformity................... ...55
12.1 Wording of the Original Declaration
of Conformity............................................. 56
0000001503_002_EN_02-12-2019 Page 3 (56)