GOM ARAMIS - System Overview; Important Features; Technical Data

4 System Overview
4.1 Important Features
The ARAMIS Adjustable SRX system is a measuring system that consists of
modules. Not all components that are listed must be part of the scope of
delivery. The following primarily describes a fully equipped system for 3D
applications.
Each ARAMIS Adjustable SRX system consists of the following compo‐
nents:
•
Camera support
•
One or two cameras with 8 GB camera memory each (optional)
•
12M (4096 x 3068) pixels camera resolution
•
Pixel size of 5.5 μm
•
•
Frame rate with optional camera memory: from 335 fps (full
frame) up to 2000 fps (partial image)
•
Frame rate with PC memory: from 75 fps (full frame) up to 490 fps
(partial image)
•
Sensor controller (GOM Testing Controller)
•
Sensor connection hub
•
Two camera lenses
•
High-performance computer
•
Application software
Optional components for the ARAMIS Adjustable SRX system:
•
LED specimen lighting
•
Laser pointers for optimum sensor adjustment
•
Control of the light sources via the GOM Testing Controller
The sensor controller (GOM Testing Controller) supplies the power supply
for the cameras and the laser pointer and the trigger signals for control‐
ling the image recording.
The software controls both cameras for the image acquisition.
The data of the two cameras is transmitted to the high-performance com‐
puter via 10 GBit/s Ethernet cables.
Defined measuring volumes with preadjusted camera lenses are available
(see 4.4 Sensor Configurations).
You can adjust a used measuring volume individually to your measuring
task.
To each measuring volume belongs a calibration object.
4.2 Technical Data
In the following table Tab. 1, you find an overview of the technical data of
the ARAMIS Adjustable SRX system.
0000001503_002_EN_02-12-2019
Page 10 (56)