Grandstream Networks UCM6302A User Manual

P a g e | 109
UCM630xA Series User Manual
Version 1.0.9.10
Type
Select Email type.
 MTA: Mail Transfer Agent. The Email will be sent from the
configured domain. When MTA is selected, there is no need to set
up SMTP server for it or no user login is required. However, the
Emails sent from MTA might be considered as spam by the target
SMTP server.
 Client: Submit Emails to the SMTP server. A SMTP server is
required, and users need login with correct credentials.
Domain
Specify the domain name to be used in the Email when using type
"MTA".
SMTP Server
Specify the SMTP server when using type "Client".
Enable SASL
Authentication
Enable SASL Authentication. When disabled, UCM will not try to use
the username and password for mail client login authentication. Most
of the mail server requires login authentication while some others
private mail servers allow anonymous login which requires disabling
this option to send Email as normal. For Exchange Server, please
disable this option.
Username
Username is required when using type "Client". Normally it is the Email
address.
Password
Password to login for the above Username (Email address) is required
when using type "Client".
POP/POP3 Server Address
Configure the POP/POP3 server address for the configured username
Example: pop.gmail.com
POP/POP3 Server Port
Configure the POP/POP3 server port for the configured username
Example: 995
Display Name
Specify the display name in the FROM header in the Email.
Sender
Specify the sender's Email address.
For example: pbx@example.mycompany.com.

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English