Grandstream Networks UCM6302A User Manual

P a g e | 128
UCM630xA Series User Manual
Version 1.0.9.10
Table 29: Global Policy Parameters – Localization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end
device’s LCD.
Enable NTP
To enable the NTP service.
NTP Server
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
NTP Update Interval
Configure the NTP update interval.
Time Zone
Configure the time zone used on the SIP end device.
Enable Daylight Saving Time
Select either to enable or disable the DST.
Table 30: Global Policy Parameters – Phone Settings
Default Call Settings
Dial Plan
Configure the default dial plan rule. For syntax and examples, please refer
to user manual of the SIP devices to be provisioned for more details.
Enable Call Features
When enabled, “Do Not Disturb”, “Call Forward” and other call features can
be used via the local feature code on the phone. Otherwise, the ITSP
feature code will be used.
Use # as Dial Key
If set to “Yes”, pressing the number key “#” will immediately dial out the
input digits.
Auto Answer by Call-info
If set to “Yes”, the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep, based on the SIP
Call-Info header sent from the server/proxy.
The default setting is enabled.

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English