Grandstream Networks UCM6302A User Manual

P a g e | 81
UCM630xA Series User Manual
Version 1.0.9.10
OpenVPN®
OpenVPN® settings allow the users to configure UCM630xA to use VPN features, the following table gives
details about the various options in order to configure the UCM as OpenVPN Client.
Table 14: UCM630xA System SettingsNetwork SettingsOpenVPN®
OpenVPN®
Enable
Enable / Disable the OpenVPN® feature.
Configuration
Method
Select OpenVPN® configuration method.
Manual Configuration: Allows to configure OpenVPN® settings manually.
Upload Configuration File: Allows to upload. ovpn and .conf files to the UCM
and to automatically configure OpenVPN® settings.
OpenVPN®
Server Address
Configures the hostname/IP and port of the server. For example: 192.168.1.2:22
OpenVPN®
Server Protocol
Specify the protocol user, user should use the same settings as used on the
server
OpenVPN®
Device mode
Use the same setting as used on the server.
 Dev TUN: Create a routed IP tunnel.
 Dev TAP: Create an Ethernet tunnel.
OpenVPN® Use
Compression
Compress tunnel packets using the LZO algorithm on the VPN link. Do not
enable this unless it is also enabled in the server config file.
Enable Weak
SSL Ciphers
Either to enable the Weak SSL ciphers or not.
OpenVPN®
Encryption
Algorithm
Specify the cryptographic cipher. Users should make sure to use the same
setting that they are using on the OpenVPN server.
OpenVPN® CA
Cert
Upload as SSL/TLS root certificate. This file will be renamed as ‘ca.crt’
automatically.

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English