LDAP Server
The UCM630xA has an embedded LDAP/LDAPS server for users to manage corporate phonebook in a
centralized manner.
By default, the LDAP server has generated the first phonebook with PBX DN "ou=pbx,dc=pbx,dc=com"
based on the UCM630xA user extensions already.
Users could add new phonebook with a different Phonebook DN for other external contacts. For example,
"ou=people,dc=pbx,dc=com".
All the phonebooks in the UCM630xA LDAP server have the same Base DN "dc=pbx,dc=com".
Term Explanation:
cn= Common Name
ou= Organization Unit
dc= Domain Component
These are all parts of the LDAP data Interchange Format, according to RFC 2849, which is how the LDAP tree
is filtered.
If users have the Grandstream phone provisioned by the UCM630xA, the LDAP directory will be set up on the
phone and can be used right away for users to access all phonebooks.
Additionally, users could manually configure the LDAP client settings to manipulate the built-in LDAP server on
the UCM630xA. If the UCM630xA has multiple LDAP phonebooks created, in the LDAP client configuration,
users could use "dc=pbx,dc=com" as Base DN to have access to all phonebooks on the UCM630xA LDAP
server, or use a specific phonebook DN, for example "ou=people,dc=pbx,dc=com", to access to phonebook with
Phonebook DN "ou=people,dc=pbx,dc=com " only.
UCM can also act as a LDAP client to download phonebook entries from another LDAP server.
To access LDAP server and client settings, go to Web GUISettingsLDAP Server.
LDAP Server Configurations
The following figure shows the default LDAP server configurations on the UCM630xA.
To Next Page
Loading...
Need help?
General
