If set to “Yes”, when XML phonebook is downloaded, the entries added
manually will be automatically removed.
Firmware source via ZeroConfig provisioning could a URL for external
server address, local UCM directory or USB media if plugged in to the
UCM630xA. Select a source to get the firmware file:
URL
If select to use URL to upgrade, complete the configuration for the
following four parameters: “Upgrade Via”, “Server Path”, “File Prefix”
and “File Postfix”.
Local UCM Server
Firmware can be uploaded to the UCM630xA internal storage for
firmware upgrade. If selected, click on “Manage Storage” icon next to
“Directory” option, upload firmware file and select directory for the end
device to retrieve the firmware file.
Local USB Media
If selected, the USB storage device needs to be plugged into the
UCM630xA and the firmware file must be put under a folder named
“ZC_firmware” in the USB storage root directory.
Local SD Card Media
If selected, an SD card needs to be plugged into the UCM630xA and
the firmware file must be put under a folder named “ZC_firmware” in
the USB storage root directory.
To Next Page
Loading...
Need help?
General
