Grandstream Networks UCM6302A User Manual

P a g e | 177
UCM630xA Series User Manual
Version 1.0.9.10
Table 47: IAX Extension Configuration ParametersFollow Me
Follow Me
Enable
Configure to enable or disable Follow Me for this user.
Skip Trunk Auth
If the outbound calls need to check the password, we should enable this option or
enable the option "Skip Trunk Auth" of the Extension. Otherwise this Follow Me cannot
call out.
Music On Hold
Class
Configure the Music On Hold class that the caller would hear while tracking the user.
Enable
Destination
Configure to enable destination.
Default
Destination
The call will be routed to this destination if no one in the Follow Me answers the call.
Confirm When
Answering
If enabled, call will need to be confirmed after answering.
Use Callee DOD
for Follow Me
Use the callee DOD number as CID if configured Follow Me numbers are external
numbers.
New Follow Me
Number
Add a new Follow Me number which could be a "Local Extension" or an "External
Number". The selected dial plan should have permissions to dial the defined external
number.
Dialing Order
This is the order in which the Follow Me destinations will be dialed to reach the user.
Create New FXS Extension
The UCM630xA supports Foreign eXchange Subscriber (FXS) interface. FXS is used when user needs to
connect analog phone lines or FAX machines to the UCM630xA.

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English