Grandstream Networks UCM6302A User Manual

P a g e | 54
UCM630xA Series User Manual
Version 1.0.9.10
Select either 2022-02-22 22:22 or 2011-01-11 11:11 to start the RTC (Real-
Time Clock) test pattern. Check the system time from either the LCD idle
screen or in the web portal System StatusSystem InformationGeneral
page. To revert back to the correct time, manually reboot the device.
 Hardware Testing
Select Test SVIP to verify hardware connections within the device. The result
will display on the LCD when the test is complete.
Web Info
 Protocol: Web access protocol (HTTP/ HTTPS). HTTPS is used by default.
 Port: Web access port number, which is 8089 by default.
SSH Switch
 Enable SSH
 Disable SSH
SSH access is disabled by default
Use the LED Indicators
The UCM6300A/6302A has LED indicators on the network port to display connection status and the following
picture shows the other ports status.
Figure 9: Ports Status
The UCM6304A/6308A has LED indicators in the front to display connection status. The following table shows
the status definitions.

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English