Click on in order to access to the discovery menu as shown on [Discovery] section.
Click on to add a new device to zero config database using its MAC address.
Click on to delete selected devices from the zero-config database.
Click on to modify selected devices.
Click on to batch update a list of devices, the UCM on this case will send SIP NOTIFY
message to all selected devices in order to update them at once.
Click on to reboot selected devices (the selected devices, should have been provisioned with
extensions since the phone will authenticate the server which is trying to send it reboot command).
Click on to clear all devices configurations.
Click on to upload CSV file containing list of devices.
Click on to export CSV file containing list of devices. This file can be imported to another UCM
to quickly set it up with the original UCM’s devices.
Click on to copy configuration from one device to another. This can be useful for easily replace
devices and note that this feature works only between devices of same model.
All these operations will be detailed on the next sections.
Global Configuration
Global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN with the
UCM630xA no matter what the Grandstream device model it is. It is divided into two levels:
Global Policy
Global Templates
To Next Page
Loading...
Need help?
General
