Security Settings
The UCM630xA provides users firewall security configurations to prevent certain malicious attack to the
UCM630xA system. Users could configure to allow, restrict, or reject specific traffic through the device for security
and bandwidth purpose. The UCM630xA also provides Fail2ban feature for authentication errors in SIP
REGISTER, INVITE and SUBSCRIBE. To configure firewall settings in the UCM630xA, go to Web GUISystem
SettingsSecurity Settings page.
Static Defense
Under Web GUISystem SettingsSecurity SettingsStatic Defense page, users will see the following
information:
Current service information with port, process, and type.
Typical firewall settings.
Custom firewall settings.
The following table shows a sample current service status running on the UCM630xA.
Table 15: UCM630xA FirewallStatic DefenseCurrent Service
To Next Page
Loading...
Need help?
General
