To Next Page

To Previous Page

P a g e | 148

UCM630xA Series User Manual

Version 1.0.9.10

A preview of the “Advanced” settings is shown in the above figure. There are five levels configurations as

described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The configurations in all levels

will take effect for the device. If there are same options existing in different level configurations with different

value configured, the higher-level configuration will override the lower-level configuration.

(1) Global Policy

This is the lowest level configuration. The global policy configured in Web GUIValue-added

FeaturesZero ConfigGlobal Policy will be applied here. Clicking on “Modify Global Policy” to

redirect to page Value-added FeaturesZero ConfigGlobal Policy.

(2) Global Templates

Select a global template to be used for the device and click on to add. Multiple global templates

can be selected, and users can arrange the priority by adjusting orders via and . All the selected

global templates will take effect. If the same option exists on multiple selected global templates, the

value in the template with higher priority will override the one in the template with lower priority. Click on

to remove the global template from the selected list.

(3) Default Model Template

Default Model Template will be applied to the devices of this model. Default model template can be

configured in model template under Web GUIValue-added FeaturesZero ConfigModel

Templates page. Please see default model template option in [Table 37: Create New Model Template].

(4) Model Templates

Select a model template to be used for the device and click on to add. Multiple model templates

can be selected, and users can arrange the priority by adjusting orders via and . All the selected

model templates will take effect. If the same option exists on multiple selected model templates, the

value in the template with higher priority will override the one in the template with lower priority. Click on

to remove the model template from the selected list.

(5) Customize Device Settings

This is the highest-level configuration for the device. Click on “Modify Customize Device Settings” and

following dialog will show.

Grandstream Networks UCM6302A User Manual

Other manuals for Grandstream Networks UCM6302A