UCM630xA Series User Manual
Version 1.0.9.10
If DND is enabled, calls from the whitelisted numbers will not be rejected. Multiple
numbers are supported and must be separated by new lines. Pattern matching is
supported.
Z match any digit from 1-9.
N match any digit from 2-9.
X match any digit from 0-9.
Calls from users in the forward whitelist will not be forwarded. Pattern matching is
supported.
Z match any digit from 1-9,
N match any digit from 2-9,
X match any digit from 0-9.
If enabled, UCM630xA will automatically alert this extension when a called party is
available, given that a previous call to that party failed for some reason. By default, it
is disabled.
Two modes for Call Completion are supported:
Normal: This extension is used as ordinary extension.
For Trunk: This extension is registered from a PBX.
The default setting is “Normal”.
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC requests
this channel can make.
The minimum value is 1.