Grandstream Networks UCM6302A User Manual

P a g e | 175
UCM630xA Series User Manual
Version 1.0.9.10
Simultaneously
Use callee DOD on
FWD or RS
Use the callee's DOD number as CallerID on Outgoing Forwarding or Ring
Simultaneously calls.
Monitor privilege control
Allow call-barging
Members of the list can spy on this extension via feature codes.
Seamless transfer privilege control
Allowed to
seamless transfer
Members of the list can seamlessly transfer via feature code.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM630xA, which can be configured in
the global ring timeout setting under Web GUIPBX SettingsVoice
PromptCustom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUICDRRecording
Files.
Skip Trunk Auth
 If set to “Yes”, users can skip entering the password when making outbound calls.
 If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
 If set to “No”, users will be asked to enter the password when making outbound
calls.
Time Condition for
If “Skip Trunk Auth” is set to “By Time”, select a time condition during which users can

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English