UCM630xA Series User Manual
Version 1.0.9.10
Attach Voicemail
to Email
Configures whether or not to attach voicemail audio file to the voicemail notification
emails.
Keep Voicemail
after Emailing
Only applies if extension-level or global Send Voicemail to Email is enabled.
CallerID name that will be used for emergency calls and callbacks.
If selected, this extension will be disabled on the UCM630xA.
Note: The disabled extension still exists on the PBX but cannot be used on the end
device.
Configure the first name of the user. The first name can contain characters, letters,
digits and _.
Configure the last name of the user. The last name can contain characters, letters,
digits and _.
Fill in the Email address for the user. Voicemail will be sent to this Email address.
Configure the password for user portal access. A random numeric password is
automatically generated. It is recommended to use the randomly generated password
for security purpose.
Configure the Mobile number of the user.
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under Web GUIPBX
SettingsVoice PromptLanguage Settings. The dropdown list shows all the
current available voice prompt languages on the UCM630xA. To add more languages
in the list, please download voice prompt package by selecting "Check Prompt List"
under Web GUIPBX SettingsVoice PromptLanguage Settings.
Table 49: FXS Extension Configuration ParametersMedia