UCM630xA Series User Manual
Version 1.0.9.10
Immediate Hotline:
When the phone is off-hook, UCM630xA will immediately dial the preset number
Delay Hotline:
When the phone is off hook, if there is no dialing within 5 seconds, UCM630xA
will dial the preset number.
Monitor privilege control
Members of the list can spy on this extension via feature codes.
Seamless transfer privilege control
Allowed to
seamless transfer
Members of the list can seamlessly transfer via feature code.
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM630xA, which can be configured in
the global ring timeout setting under Web GUIPBX SettingsVoice
PromptCustom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUICDRRecording
Files.
If set to “Yes”, users can skip entering the password when making outbound calls.
If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
If set to “No”, users will be asked to enter the password when making outbound
calls.