UCM630xA Series User Manual
Version 1.0.9.10
Check to enable Forward Error Correction (FEC) for Video.
Check to enable Forward Error Correction (FEC) for Audio.
Access Control List manages the IP addresses that can register to this extension.
Allow All: Any IP address can register to this extension.
Local Network: Only IP addresses in the configured network segments can
register to this extension. Press “Add Local Network Address” to add more IP
segments.
Select jitter buffer method.
Disable: Jitter buffer will not be used.
Fixed: Jitter buffer with a fixed size (equal to the value of "jitter buffer size")
Adaptive: Jitter buffer with an adaptive size (no more than the value of
"max jitter buffer").
NetEQ: Dynamic jitter buffer via NetEQ.
Configure the codecs to be used.
Select which presence status to set for the extension and configure call forward
conditions for each status. Six possible options are possible: “Available”, “Away”,
“Chat”, “Custom”, “DND” and “Unavailable”. More details at [PRESENCE].
Call Forward
Unconditional
Enable and configure the Call Forward Unconditional target number. Available options
for target number are:
“None”: Call forward deactivated.
“Extension”: Select an extension from dropdown list as CFU target.
“Custom Number”: Enter a customer number as target. For example: *97.
To Next Page
Loading...
Need help?
General
