GRAPHTEC LABELROBO LCX603 - Page 35

LCX603-UM-651-9370 2-27
2 Setup
(3) Releasetheribbonleversifthoseareset.
Ribbon lever
(4) Releasetheribbonstockerlocklever,andthenopentheribbonstockerdoor.
Step 1
Step2
Ribbon Stocker door
Lock lever
(5) Pulluptheribbonstockerlockleverasshowninthepicturebelow,andthendrawouttheribbon
stockerstationfromtheLCX603.
Step 1
Step 2
Ribbon stocker lock lever
(6) Takeouttheribbonstockerwhentheribbonstockerismountedontheribbonstockerstation.