GRAPHTEC LABELROBO LCX603 - Page 36

LCX603-UM-651-9370 2-28
2 Setup
(7) Installthemediaassisttotheribbonstockerstationasshowninthepicturebelow.
Conrmthepinsofmediaassistarettedtotheguideofmediastockerstation.
The pins must be
properly fitted to here.
Media assist
(8) GentlypushtheribbonstockerlocklevertoinstallthemediaassisttotheLCX603untilhearclick
sound.
Pushtheribbonstockerlockleverandsecuretheleversothattheribbonstockerstationisrmly
fastenedintheslot.
Step 1
Step 2
Ribbon stocker lock lever
Keep the ribbon
stocker door open
Click!
(9) Keeptheribbonstockerdooropen.