GRAPHTEC LABELROBO LCX603 - Page 59

LCX603-UM-651-9370 2-51
2 Setup
(5) PresstheF1Key(PRINTTESTPATTERN),thefollowingmenuisdisplayed.
PRIN T TES T PAT T E RN?
YES: E NTER N O :ESC
(6) PresstheENTERKeytoprintthetestpattern.
WhenpresstheESCkeyatabovemenu,themenureturnstothepreviousmenu.
Density adjustment from the printing result
Adjusttheprintingdensityfromtheprintingresultoftestpatternforallprinthead.
Ifaprintingresultseemstorub,graduallyincreasetheprintingdensity.Don’tsettotheprintingdensitytoo
high,theribbonstickstoaheadortheribbonbreaks.
Thewrinkleappearsaftertheinkribbonisinstalled,printthetestpatternseveraltimesuntilthewrinkle
disappearsfromtheprintingresult.
How to adjust the printing density
(1) PresstheLOCALKey,thefollowingmenuisdisplayed.
PR I N TER M ENU>
C U T TER M ENU>
O U TPU T ALL>
(2) PresstheF1Key(PRINTMENU),thefollowingmenuisdisplayed.
C OPY>
D A TA C L EAR>
C OND I T ION>
1/4
(3) PresstheNEXTKeyuntilthefollowingmenuisdisplayed.
PRI N T SE T T ING>
PRI N T TE S T PA T T ERN>
H EAD A D JUS T M ENT>
2/4 PRIN T E D L E N GTH>
(4) PresstheF1Key(PRINTSETTING),thefollowingmenuisdisplayed.
PRI N T DE N S ITY>
P AGE P R INT M ODE>
ANT I -WRI N K LE L I NES>
(5) PresstheF1Key(PRINTDENSITY),thefollowingmenuisdisplayed.
CON S TRUC T I ON M E DIA>
DEN S I TY H E AD3>
DEN S I TY H E AD2>
DEN S I TY H E AD1>