GRAPHTEC LABELROBO LCX603 - Page 62

LCX603-UM-651-9370 2-54
2 Setup
How to clean the platen roller
(1) Detachtheribbonstocker.
(2) Opentheprintheadsection,andgentlywipetheplatenrollerwiththecleaningstickasshowninthe
picturebelow.
Sincethereisthepossibilityofdamagingtheplatenrollerifyourubitforcefullyorwipeitwithacloth
thathasnotbeenspecied,wipeitonlywithacleaningstick.
Whenparticularlydirty,applyalittleethanolorIPA(IsopropylAlcohol)andrubitgently.
Cleaning stick
Platen Roller