GRAUPNER mz-32 HoTT User Manual

Page 27 of 49 S1024.mz-32-V2.1-EN
do is power the other airplane and wait for the receiver to establish
the bind
Note
You can view the associated bind group belonging to a memory model in the
"Bind" column on the right-hand edge of the "Model List" submenu.
Attention
If you tap on the bind group bind number ID in the “RF Set” menu the
transmitter will release the bind from the active model memory if RF is
switched off.
Binding a Model
1. Move the transmitter and receiver at a moderate distance from each
other (30cm or 1ft).
2. Switch on the mz-32 HoTT transmitter without switching on the RF
or set the RF Transmission to "OFF" in the "RF Set" field of the "RF
Set" menu.
3. Switch the receiver power system on.
4. Put the receiver in bind mode according to its manual.
5. In the transmitter display, touch the desired value field "RX1 ... RX4"
in the "Bind" column to enable the transmitter-side binding process.
If the bind was successful you will notice in the Rx column of the transmitter
the number of receiver channels for example R6, R12 with a highlighted blue
background and the LED on the receiver will change its color or state.
In case of an unsuccessful bind change the positions of the devices and
repeat the entire procedure.
Removing Existing Bind
1. Switch on the mz-32 HoTT transmitter without switching on the RF
or set the RF Transmission to “OFF” in the “RF Set” field of the “RF
Set” menu.
2. In the transmitter display, touch the desired value field "RX1 ... RX4"
in the "Bind" column to trigger a transmitter-side binding process.
The existing binding is deleted during the binding attempt (receiver
must be switched off for removing the bind)
Multi Receiver Binding
The mz-32 supports multi receiver binding. You can bind up to four
Graupner HoTT receivers. Each bound receiver can add to the total available
channels of all receivers bound to a single model.
For example, if the first bound receiver is a 12-channel receiver and the
second bound receiver is a 6-channel receiver the total channel count is 18
channels.

GRAUPNER mz-32 HoTT Specifications

General

Brand	GRAUPNER
Model	mz-32 HoTT
Category	Transmitter
Language	English