Page 9 of 49 S1024.mz-32-V2.1-EN
For Safety! Handling
the battery
• Never program your transmitter while normally using the model. This
can result in both inattention when controlling and incorrect
programming.
CAUTION
Avoid any kind of short-circuit in all sockets of the transmitter and of the
receiver! Risk of fire! Use only suitable connectors. In no case the electronic
component of the transmitter or of the receiver may be changed or modified.
Any interference will void the warranty.
Note
During transport, protect the model and the transmitter from damages.
CAUTION
• Protect all equipment from dust, dirt, moisture. Only use in dry locations.
• Do not use any damaged battery.
• Any alterations to the battery can cause serious injury or burns.
• Batteries may not be heated, burned, short-circuited or charged with
excessive current or with reversed polarity.
• Combustible or highly flammable objects are to be kept away from the
charging area.
• Never leave the charger unattended when it is connected to the power
supply.
• Please charge your batteries only in rooms fitted with a smoke detector.
• Always charge the battery with a suitable charger.
• The maximum quick charging current specified for the respective cell
type may not be exceeded.
• If the battery heats up above 60°C / 140°F while it is being charged, stop
charging and let the battery cool down to approximately 30 - 40°C / 86 –
104 °F
• Never charge batteries that have already been charged or hot ones. If a
cell in a battery pack has become particularly hot following a quick-
To Next Page
Loading...
Need help?
General
