EN - 27
An authorized Gravely EV dealer can provide
service and adjustments to keep your unit
operating at peak efficiency.
MAINTENANCE SCHEDULE
NOTICE: DO NOT clean unit with water. To
avoid damage to electrical components and
motors, clean unit with compressed air or a
dry cloth.
SERVICE PARTS
Contact an authorized Gravely EV dealer to
purchase service parts for your unit.
CHECK MOWER BLADES
Check blades for wear. Replace or sharpen
as needed.
Remove Blades
1. Remove key and wait for moving parts to
stop and for hot parts to cool.
2. Remove all batteries from mower.
3. Chock wheel. Strap and clamp unit onto
lift, if used.
IMPORTANT: Right blade on rear-discharge
decks is retained with a left-hand thread bolt.
An impact wrench is required to remove
blade bolts.
See Figure 28.
4. Remove blade assembly:
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.
Service Performed
Each Use
Every 25 hrs.
Every 50 hrs.
Every 100 hrs.
Every 250 hrs.
Every 500 hrs.
Clean Grass and
Debris from Top and
Underside of Deck
•
Clean Debris from
Under Fenders
•
Clean Charge Port and
USB Port
•
Clean Seat Mount
Plate (Both Sides)
•
Clean Battery Busbar •
Clean Battery
Terminals
•
Inspect Wiring, and
Wire Harnesses
•
Inspect Batteries and
Busbar Interfaces for
Damage
•
Clean Traction Drive
Motor Bay
•
Change Gearcase Oil * • •
Check Safety Interlock
System
•
Check Parking Brake •
Check Tire Pressure •
Check Mower Blades •
Check Battery SOC •
Check Fasteners •
Lubricate Unit •
* Change gearcase oil after first 250 hours of
operation and every 500 hours thereafter.
Contact an authorized Gravely EV dealer.
Description Qty. Part No.
110V Power Cord 1 09199600
220V Power Cord 1 09199800
10 Amp Mini Fuse 1 21200002
7.5 Amp Mini Fuse 1 21200003
Hood Release Cable 1 06900730
80W-140 Synthetic Gear
Oil
1 00980720
Left / Center Mower Blade
(Model 997002)
2 09372000
Right Mower Blade (Model
997002)
1 09372100
Mower Blade (Model
997001)
3 09182100
CAUTION: AVOID INJURY. Use
sturdy gloves or padding to
protect hands when working with
mower blades.
Rotation of one blade rotates the
other blades.