GRAVOGRAPH LS900 XP - Completing Autofocus Adjustment Process

67
M_LS900 XP IQ Energy_EN_B
Preventive maintenance
13. Remove the gage.
Donotforgettoremovethegageatthispointintheprocedure,otherwisethereisariskofdamagetothe
machine.
14. Close the door of the machine.
15. Press the key. Hold the key(s) down until Autofocus starts.
X-Y ADJUSTMENT
Z ADJUSTMENT
ALIGNMENT MODE
16. To cancel/exit, press the key:
LASER SETTINGS
TICKLE
RE-ALIGN MACHINE
USING TIME XXX
17. To cancel/exit, press the key:
The following screen is displayed for 3 seconds:
<< GRAVOGRAPH >>
FPGA X.XX
LCD SOFT X.XX
32 Mo BOOT X.XX
The screen below appears:
<READY TO RECEIVE >