GRAVOGRAPH LS900 XP - Required Safety Labels

74 pages

Save Page as PDF

To Next Page

To Previous Page

D. Requiredsafetylabels

Last updated: 12/2016

Required safety labels

Shared labels

LASER RADIATION

Electrical hazard

LS100

LS100 Ex

LS100 energy

LS900

LS900 XP

LS1000 XP

Flammable

materials

Hot surface

LS100 Ex Fibre

LS900 Fibre

Flammable

materials

Hot surface

Laser Solution

Fiber-Series

Laser Solution

Hybrid-Series

Laser Solution

Green-Series

LW1 - LW2

(LaserTop 2000)

M_LS900 XP IQ Energy_EN_B

Main Page

Table of Contents2
Foreword6
Appreciation6
Information6
Legal Notices7
Regulation Observance8
Required Safety Labels9
Introduction10
Presentation10
Identification Of The Marking Equipment10
Work Station Safety10
X84; Air Extraction System10
X84; Water Chiller - Only for ENERGY Machines11
X84; Handling the Machine12
Unpacking13
Package Contents15
X84; Package Contents - Machine15
X84; Toolbox: Content15
X84; Package Contents - Water Chiller - Only For Energy Machines16
X84; Cardboard Box: Content - Only for ENERGY Machines16
Laser Safety17
Recommendations and Safety Regarding Laser Devices17
X84; Personnel Safety17
Using the Passthrough Feature - Class 4 - (Optional)18
Work Station Safety19
X84; Proposed Warning Label at the Entrance to the Laser Controlled Zone (Using the Passthrough Feature - Class 4)19
X84; General Instructions20
X84; Wearing Safety Glasses20
Optical Components21
X84; Safety Precautions21
X84; Protective Measures in the Event of Thermal Decomposition or Scored or Scratched Lenses21
X84; Protective Measures In The Event Of A Broken Lens21
X84; Arrangements for Disposal22
Potential Hazards Related To Materials Worked With23
X84; Fumes and Toxic Particles23
X84; Examples Of Secondary Radiation Risks24
High Voltage Safety - (Only for ENERGY Machines)24
Description of the Machine25
Front View of the Machine25
X84; Engraving Table25
Rear View of the Machine26
Water Chiller (Only for ENERGY Machines)27
X84; Front View27
X84; Rear View27
Recommendations for Installation28
Physical Installation28
Water Chiller (Only for ENERGY Machines)29
Air Extraction System (Optional)30
X84; Head Mode (Option: Suction Hose)31
Air Assist (Option: Air Compressor)32
Requirements33
Software Compatibility33
Connecting/Disconnecting The Water Chiller - Filling The Tank (Only For Energy Machines)34
X84; Initial Installation (if Necessary)34
X84; Filling The Tank35
X84; Disconnecting the Water Chiller (Shipping Position)36
Electrical Installation37
Connections - Installation38
Power Supply Connection Water Chiller (Only for ENERGY Machines)38
X84; Switching on the Chiller38
X84; Resolution of the Problems: Water Chiller39
Connections - Installation40
Unblocking The Head (Shipping Position)40
Power Supply Connection - Machine41
X84; Using the PLC Function (User Standard Inputs/Outputs)42
X84; Switching on the Machine45
X84; Resolution of the Problems45
X84; Power Down: Machine - Water Chiller46
X84; Restarting46
Machine / PC Connection47
X84; Machine / PC Connection (USB Connection)47
Operating Instructions for the Machine48
Control Panel48
X84; Indicator Light(S)50
Description of the Human-Machine Interface50
X84; Joystick50
X84; Access To The Different Menus51
Control Panel: Water Chiller (Only for ENERGY Machines)52
X84; Reset52
X84; Temperature Alarm Function53
X84; Flow Alarm Function53
X84; General Parameters53
X84; Advanced Parameters55
Using the Machine56
Switching on the PC / Switching on the Machine56
Creating the Composition56
Setting the Driver Properties56
Transferring The File57
Positioning the Object to be Engraved57
Focusing57
X84; Autofocus57
Start-Up Engraving58
Removing and Reloading Material58
Adaptable Accessories59
Cylinder Attachment59
Cutting Out Kit59
Compressor Kit (Air Assist)60
Honeycomb Cutting Table60
Pass Through" - (Class 4 Laser)61
Preventive Maintenance62
General Maintenance62
Accessories Provided62
Cleaning the System63
X84; Engraving Table63
X84; Guides/Belts63
X84; Fume Extraction Outlets63
Optics Maintenance64
X84; Mirror(S) / Lens(Es)64
Autofocus Adjustment65
Setting Point Zero (Origin)68
Technical Specifications69
Physical Characteristics - LS900 / LS900 XP / LS900 ENERGY69
Engraving Characteristics69
Noise Emission of the Machine (ISO 11201 Standard)69
Environment70
Laser Characteristics70
Electrical Characteristics70
Connections and Cabling71
Firmware Characteristics - Driver71
Characteristics of the Water Chiller (Only for ENERGY Machines)72
Appendix: Engraving Menu73
Parameters" Sub-Menu74
File" Sub-Menu74
Info" Sub-Menu74
Configuration" Sub-Menu74

GRAVOGRAPH LS900 XP - Required Safety Labels

Table of Contents

Related product manuals