Model 11-R
GRIMM AEROSOL TECHNIK GmbH & Co.KG Seite 66 von 83
6 Maintenance and cleaning
6.1 Maintenance and cleaning by the customer
Some maintenance on the Mini-LAS 11-R can be carried out by the customer. This maintenance work is
described in this section. Other maintenance work, such as internal filter replacement, must be carried
out by authorised service technicians. If you are not sure or need the support of a service technician,
please contact the dealer nearest you or the contact person at GRIMM Aerosol Technik GmbH & Co.
KG.
Completing the following points is recommended!
6.1.1 Filter chamber
The filter chamber has to be cleaned with a lint-free cloth or soft brush each time the filter is replaced.
Tough dirt can also be remove with special cleaning cloths for IT equipment.
Figure 6-1: Cleaning the filter chamber
To Next Page
Loading...