EasyManua.ls Logo

Grizzly MTS 43 AC E2 - Symbols on the Equipment

Grizzly MTS 43 AC E2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
117
GB
Symbols on the Equipment
On the equipment, there are information symbols. These convey important information
about the product or information about its use.
Caution: Special safety measures are required when handing the equipment!
The entire operating instructions must be read and understood before use. Non-
observance of the operating instructions may be fatal!
Symbol on the fuel pump:
Press the fuel pump 10x before
starting
Symbol on the choke lever
Lever in cold start position
(START)
Lever in warm start position
(RUN)
Read the operating instructions carefully before using the equipment.
Wear eye, ear and head protection.
Wear protective gloves. Risk of injury from cuts.
Wear safety boots with sturdy soles.
Ensure that the cutting head does not come into contact with foreign bodies
when starting or during the work.
Maintain a safety distance of min. 15 m from others.
Danger from parts being thrown out! Keep away from other people.
Caution! Fuel and fuel fumes are ammable. Risk of re and explosion!
Caution! Hot surfaces – risk of
burns!
Specication of the guaranteed
sound power level L
WA
in dB.
Mix ratio 40:1,
Use ONLY fuel mix

Table of Contents

Related product manuals