GSK CNC Equipment Co., Ltd.
10
Encoder
Feedback
2500 pulse/rev (resolution:10000) incremental
encoder
Speed control
4 kinds of internal speed instructions and (+10～-10) external analog
voltage instructions
Monitor function
Speed, current orientation, instruction pulse accumulation,
Orientation deviation, motor torque, motor current, linear
speed, rotor absolute orientation, instruction pulse frequency,
running state, input/output terminal signal and so on
Protection function
Overspeed, overvoltage/under-voltage of main power supply,
overcurrent, overload, brake abnormity, encoder abnormity, control
power supply abnormity, orientation oversize
Display, operation 6-bit LED digital tube, 4 buttons
Load inertia Less than quintuple of motor inertia
Thin radiating fin Thick radiating fin
Weight 2.67Kg 3.48Kg
Dimension 244×163×92mm 244×163×112mm
To Next Page
Loading...