GW Instek GPP-3060 - Page 10

GPP-3060/6030 User Manual
10
Cleaning the
power supply
 Disconnect the power cord before cleaningit .
 Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid
into it.
 Do not use chemicals containing harsh products
such as benzene, toluene, xylene, and acetone.
Operation
Environment
 Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (Note below)
 Relative Humidity: < 80%
 Altitude: < 2000m
 Temperature: 0°C to 40°C
Storage
environment
 Location: Indoor
 Relative Humidity: < 70%
 Temperature: -10°C to 70°C