GW Instek GPP-3060 - Status Commands

REMOTE CONTROL
183
Example
:TRIGger:OUT:SOURce? D0
Returns the controlled channel from the trigger
output of D0 data line.
Command
:TRIGger:OUT:STATe [D0|D1|D2|D3|D4,]
{ON|OFF}
Function
Set the data line trigger output state on or off.
Example
:TRIGger:OUT:STATe D0,ON
Set the data line D0 trigger output state on.
Command
:TRIGger:OUT:STATe? [D0|D1|D2|D3|D4]
Function
Query trigger output status of data line.
Example
:TRIGger:OUT:STATe? D0
Query trigger output status of data line D0.
Status Commands
Command
STATus?
Function
Returns the Status .
Return
parameter
8 bytes in the following format
Note
Byte 6,7: 11=19200bps, 38400bps, LAN, GPIB
Example
STATus?