GW Instek GPP-3060 - GPIB

GPP-3060/6030 User Manual
108
GPIB
Description
The communication data format, compatibility
settings and GPIB address must all be
configured before using GPIB remote control.
Interface
Rear panel GPIB port.
Connection
Select GPIB port in the Interface
after connecting the GPIB cable.
The message GPIB will appear
gray in the status bar when
connection, and turns to white
color while the first command
connects succesfully.
The front panel keys are
automatically locked when the
connection is successful.
Parameter Setting
Press the System button followed by pressing
the F1 (Interface) button to select the target
port: F3 (GPIB). The setting of communication
address will appear automatically. Input
required address when the setting of GPIB
Addr turn red color and press the F1 (Enter)
button to confirm.
Display
The address information of GPIB will appear
on LCD. Refer to the description below:
11----> GPIB address of the current unit