GW Instek GPP-3060 - Display Commands

GPP-3060/6030 User Manual
132
Display Commands
Command
:DISPlay:ENABle <b>
Function
Turn the LCD display on or off.
Description
b
0/OFF: Turns the display off.
1/ON: Turns the display on.
Example
:DISPlay:ENABle ON
Turns the LCD display on.
Command
:DISPlay:ENABle?
Function
Queries the state of the display.
Return
0/OFF: Display turned off.
1/ON: Display turned on.
Example
:DISPlay:ENABle?
Returns the state of the display.
Command
:DISPlay:BRIGhtness <NRf>
Function
Sets backlight display brightness.
Description
<NRf>
Low
Middle
High
Example
:DISPlay:BRIGhtness Low
Sets the backlight to Low.
Command
:DISPlay:BRIGhtness?
Function
Queries the brightness of the display.