GW Instek GPP-3060 User Manual

REMOTE CONTROL
115
4. Click “Modify Config” to enter the network
configuration setting menu, as shown below.
Use the mouse to click on “Save and Restart” to
change the remote settings for the GPP series.
Note
Click “Undo Edits” to cancel all the edited
settings.
Click “Factory Defaults” to restore to the
factory default settings.
Exiting from
Remote Control
Mode
 Send a remote command from the PC
 Long-press the F6 (unlock) key on the front
panel.
 Unplug the USB cable from the rear panel.
Note
Hot-swappable LAN devices can be directly
disconnected to exit.

GW Instek GPP-3060 Specifications

General

Brand	GW Instek
Model	GPP-3060
Category	Power Supply
Language	English